Motor Mount Set, Density Line/Motorsport Bundle, MkIV Volkswagen & 8L/8N Audi 1.8T, 2.0L, TDI
NVH is the measurement of how much noise, vibration, & harshness gets transmitted into the cabin of your vehicle. Based on user feedback, 034Motorsport Motor Mounts transfer none to low amounts of NVH to the cabin. We recommend giving the Density Line Mounts at least 250 miles to break in after installation. NVH is subjective, so some users may find NVH to be increased or decreased from our rating. If you are experiencing higher than quoted NVH with this product, please evaluate the installation to ensure to components are touching each other and email techsupport@034motorsport.com for further assistance.
We're pleased to announce the availability of our Density Line/Motorsport Hybrid Bundle Motor Mount Set for the MkIV Volkswagen and 8L/8N Audi chassis!
034Motorsport has assembled the Density Line/Motorsport Hybrid Bundle for the serious trackday guru and seeker of ultimate performance. This kit includes everything needed to replace the three key mounts holding your engine and transmission in place on your MkIV Volkswagen or 8L/8N Audi. Offering a no-compromise solution for those looking to completely lock down their drivetrain, this kit includes 034Motorsport Track Density Motor and Transmission Mounts and a 034Motorsport Billet Aluminum Dogbone Mount.
The Track Density Engine Mount Pair is manufactured from 80 durometer rubber, which is approximately 90% stiffer than stock. The optimized void-free, solid-filled construction of 034Motorsport Density Line Mounts results in a mount that is approximately 120% stiffer than a factory mount. The Billet Aluminum Dogbone Mount is machined in-house from T6-6061 Billet Aluminum and assembled with a motorsport-grade Aurora spherical bearing and Density Line rubber bushing to eliminate any drivetrain slop.
Say "Goodbye" to wheel hop and reduce engine movement under load with this complete track-oriented mount set. No modification is requred here, because all mounts are a complete drop-in replacement for the factory units. The Density Line/Motorsport Hybrid Bundle will cause some increase in noice, vibration, and harshness (NVH) inside the cabin.
Features:
- Reduced Drivertain Slop
- Reduced Engine Movement Under Load
- More Direct Power Transfer
- Improved Shifting Feel
- Complete Drop-In Replacement of Factory Engine/Transmission/Dogbone Mounts
- Automatic and 02M Manual Transmission Compatible
What's Included:
- Track Density (80 Durometer) Optimized Void-Free Rubber Engine Mount
- Track Density (80 Durometer) Optimized Void-Free Rubber Transmission Mount
- Billet Aluminum Motorsport Dogbone Mount
Fitment:
- 1996 - 2003 Audi A3/S3 (8L)
- 1.8T (180HP & 225HP)
- 1998 - 2006 Audi TT (8N)
- 1.8T (180HP & 225HP)
- 1999 - 2005 Volkswagen Golf / GTI
- 1.8T, 2.0L, 1.9 TDI
- 1999 - 2004 Volkswagen Jetta / GLI
- 1.8T, 2.0L, 1.9 TDI
- 1999 - 2010 Volkswagen New Beetle
- 1.8T, 2.0L, 1.9 TDI
NOTE: This Street Density Mount application features stiffer and less compliant rubber, however, the mount is not designed to see significantly larger amounts of abuse, as Density Mounts use a similar design and construction to the OEM mounts. This means that driving dynamics are improved, but these mounts are not necessarily suited for more punishing applications or abuse. Normal "sport driving" will typically see these mounts lasting up to 50k miles or more. More abusive use, such as aggressive drag racing, clutch dumps, aggressive shifting, and big increases in power, can cause these mounts to fail or wear prematurely, typically in 20k miles or less. For mounts that will sustain the latter abusive scenarios, we strongly recommend our Motorsport Mounts which are designed for specifically for such use.
Density Line Drivetrain Mount Lifetime Warranty:
034Motorsport is proud to offer a Lifetime Warranty on all Density Line Engine & Transmission Mounts - a true testament to the engineering & quality of our Engine Mount products. If you're reading this, it means this product is covered!*
Whether you’ve purchased through 034Motorsport or one of our Authorized Dealers, your Density Line Drivetrain Mounts are covered by this Limited Lifetime Warranty. When you think your mounts need replacement or have experienced a mount failure, reach out to the 034Motorsport Technical Support team at TechSupport@034Motorsport.com for assistance! Once the warranty process has begun, place an order for the replacement mounts and send us the damaged/worn mounts. Once we receive the damaged/worn mounts, you'll receive a store credit rebate for the replacement mount against the MSRP of the original mount order.
The 034Motorsport Density Line Drivetrain Mount Lifetime Warranty covers all Density Line Engine & Transmission Mounts with normal wear & tear or manufacturing defects. Engine & Transmission mounts that exhibit minimal wear, signs of abuse, or that were not installed properly may not be covered. While we want all customers to be able to take advantage of the Lifetime Warranty, those who abuse the Density Line Lifetime Replacement Warranty or act in bad faith may be disqualified at our sole discretion. We want to ensure that this Program remains fair and accessible to all customers. The Density Line Drivetrain Mount Lifetime Warranty is only valid to the original purchaser. This warranty program does not cover Density Line Suspension components which are wear and replacement items.
*Note: Only Density Line Dogbone Mount Pucks are covered by the Density Line Drivetrain Mount Lifetime Warranty. The Billet Dogbone Mount is not covered.
SKU | 034-509-5023 |
---|---|
Manufacturer | 034Motorsport |
Part Number Interchange | 1J0199262BF, 1J0199555AH, 1J0199851AA |
Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Learn More: www.p65warnings.ca.gov