Flywheel, Audi I5, 01A Aluminum with 60-2 Tone Wheel
Aluminum flywheel fitting applications with the 01A transmission including Audi 80/90/Coupe Quattro and other applications. Weighs under 10lb, includes OEM TDC trigger pin for compatibility with OEM Engine Management. This flywheel features a built-in 60-2 tone wheel.
Steel ring gear and friction surface, replaceable.
Please Note: Steel pins INSIDE the aluminum make up the 60-2 tone wheel, DO NOT DRILL THROUGH THESE PINS IN AN ATTEMPT TO BALANCE THIS FLYWHEEL! It is already very close to being balanced, aluminum material can be removed from the engine side of the flywheel, adjacent to the ring gear, if needed.
Note - This flywheel does feature a 60-2 tone wheel built into it however it may not work with factory trigger setups w/o modification, each application may vary as well as which engine management system is being used. One of our threaded body hall or VR sensors can be used in applications that do not have a factory crank sensor provision, the threaded body hall sensor can be installed in the bell housing of the transmission. Once installing if you have any questions or need assistance we are happy to help.