034Motorsport B8/B8.5 Audi S4/S5 & Q5/SQ5 3.0 TFSI Performance Software
Item Details
Fitment Guide
Install Guide
Media
More Info
We Also Recommend
Reviews
Prop 65
Item Details
034Motorsport is proud to unveil an all-new line of Performance Software for B8/B8.5 Audi S4/S5 & Q5/SQ5 models equipped with the powerful 3.0 TFSI Supercharged V6 engine!
Flashed directly through your vehicle’s OBD-II port, 034Motorsport’s proprietary calibrations for the Simos 8 ECU safely and effectively increase the power output of the 3.0 TFSI engine. The result is a noticeable improvement in acceleration and throttle response, without any sacrifice in driveability or reliability.
034Motorsport's 3.0 TFSI Performance Software was developed entirely in-house on 034Motorsport's Development B8 Audi S4. The calibrations were then refined on multiple enthusiast-owned B8/B8.5 Audi S4/S5 vehicles before release.
Software Features
Increased Horsepower & Torque Throughout the Powerband
Improved Power Delivery, Acceleration, and Driving Characteristics
Available in 91 Octane, 93 Octane, and 100 Octane Calibrations
Refined Throttle Mapping for Enhanced Throttle Response & Precision
Raised RPM Limit to 7,200 for Broader Powerband
Speed Limiter Removed for Increased Top Speed
Track-Tested Calibrations Ensure Consistent Power Delivery
*If you have an automatic or DSG transmission rev limiter increases in the ECU will not change your maximum shift RPM. To increase the shift points you need performance TCU software as well
**Some octane variants are fully developed but have not yet undergone our dyno data colection process and as such the peak increases and power numbers are not yet listed, but you can expect similar gains to the difference of the octanes we have provided the full data collection and dyno information for.
034Motorsport Stage 1 Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 3.0 TFSI is engineered to safely increase horsepower and torque with no hardware modifications required. 034Motorsport's proprietary calibrations increase boost by controlling the supercharger bypass, while optimizing timing and fueling maps to extract additional power from the 3.0 TFSI engine.
Stage 1 Performance Software features a higher redline of 7,200 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 1 Performance Software also enables left foot braking, which allows for further control of the vehicle when driving on track.
034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 1 is available in 91 Octane, 93 Octane, 100 Octane, and 104 Octane files.
STAGE 2
034Motorsport Stage 2 Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 1 levels with the addition of 034Motorsport's 3.0 TFSI Supercharger Pulley Upgrade. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport's proprietary calibrations safely yield additional power from the 3.0 TFSI engine.
Stage 2 Performance Software features a higher redline of 7,200 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 2 Performance Software also enables left foot braking, which allows for further control of the vehicle when driving on track.
034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2 is available in 91 Octane, 93 Octane, 100 Octane, and 104 Octane files.
STAGE 2+
034Motorsport Stage 2+ Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 2 levels with the addition of 034Motorsport's 179 or 190mm Lower Pulley in addition to our upper pulley. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport's proprietary calibrations safely yield additional power from the 3.0 TFSI engine.
Stage 2+ Performance Software features a higher redline of 7,400 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 2+ Performance Software also enables left foot braking, which allows for further control of the vehicle when driving on track.
034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2+ is available in 91 Octane, 93 Octane, 100 Octane, 104, and E40 Octane files.
034Motorsport's Dynamic+ End User Flashing Kit allows customers to install their 034Motorsport Dynamic+ Performance Software themselves. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.
Requirements for End User Flashing:
Windows 10 Laptop with Available USB Port
Power Supply for Laptop
Secure Wired (Or Very Stable WiFi) High-Speed Internet Connection
CTEK Trickle Charger (Or Similar)
Available Electrical Outlets
034Motorsport End User Flashing Kit Contents:
034Motorsport OBD-II Adapter
USB-A to USB-B Cable
Carrying Case
User Credentials (Provided Via Email)
EMISSIONS DISCLAIMER
This product is sold for racing and off-road use only.
This product is not CARB or EPA compliant, this product is not authorized for use in California on smog controlled vehicles.
By purchasing this product, you understand this product is sold for competition use on closed roads and is not legal for use in highway or street vehicles.
Fitment Guide
Make
Model
Years
Chassis
Engine
Audi
A6
2012-2014
C7
3.0 TFSI Supercharged
Audi
A7
2014-2014
C7
3.0 TFSI Supercharged
Audi
Q5
2008-2017
B8/B8.5
3.0 TFSI Supercharged
Audi
SQ5
2012-2017
B8/B8.5
3.0 TFSI Supercharged
Audi
S4
2010-2017
B8/B8.5
3.0 TFSI Supercharged
Audi
S5
2013-2017
B8.5
3.0 TFSI Supercharged
Install Guide
This 034Motorsport ECU Upgrade can be flashed directly through your vehicle's factory OBD-II diagnostic port at home using the 034Motorsport Dynamic+ End User Flashing Kit or by bringing your vehicle to 034Motorsport or any 034Motorsport Dynamic+ Performance Software Dealer listed here.
Installation typically takes 30-45 minutes.
Media
034Motorsport B8 Audi S4 - First Stage 1 3.0 TFSI in the 11s!
