AAN High Output Coil Kit, Plug In, Includes Brackets
Only 1 left
We Also Recommend
Looking for the ultimate plug and play ignition solution for your UrS4 or RS2? Its here.
Running 5 of our ultra High Output 034EFI DIS coils with built in 20 amp drivers, this kit is the ultimate coil upgrade for any of the Motronic equipped distributorless cars such as the RS2, UrS4, etc. These coils have been tested on motors with more than 300 HP/Liter and fire effortlessly with over 60-80,000 volts of energy.
Most importantly, this kit completely eliminate the failure prone stock Power Output Stages (POS).
Includes full plug and play wiring harness so no cutting or splicing required, our mounting bracket to place the coils along the firewall behind the motor, and high quality 8mm plug wire set with long leads ensures flexible mounting options.
Consider swapping the valve cover for one from a 7A or 3B for a cleaner, simpler install, though this is not required.
NOTE, WE OFFER A STANDARD 1-YEAR WARRANTY (NOT TRANSFERABLE) ON THIS COIL KIT FOR ANY FUTURE AND PAST ORDERS.
OPTION: An upgrade to Magnecor plug wires, available either terminated or unterminated configurations, is available as an option below.
Great product. After 40,000 hard miles I had my first failure. Ever diagnosed POS system failure? You'll love this diag procedure:
1. Recognize dead miss
2. Unplug injectors one at a time to identify which cylinder (#4) is missing
3. Swap harness connection and HT wire from cyl 4 and cyl 5.
4. Unplug cyl 4 injector, engine falters
5. Unplug cyl 5 injector, no change.
6. Determine coil 4 has failed.
7. Call Sam at 034, explain the situation.
8. Receive shipping confirmation from Paul for new, warranted coil
In less than 5 minutes I had diagnosed which coil failed and arranged for a replacement. Try that with POS!!
Diagnostic simplicity alone is worth the cost of entry, let alone the increased reliability in a performance setting.
Review by Robert Blizzard /
(Posted on 8/22/2011)
Great easy install, solved all the stumbling problems the car had under load.
very easy fit, took about 30 minutes from start to finish. looks and runs great.
Only complaint: I only own metric tools, wished the 4 bolts for the coil brakets were metric and not SAE, but no big deal at all.
hignly recommend the kit.
Review by Francois Faloppa /
(Posted on 6/26/2010)
I also istalled this kit today, the car runs better than ever! i had coils failing and found this solution much better, also for less than 1/3 of the cost here in sweden for OEM coils! so thank you javad and your staff, keep up the good work!
Review by per johansson /
(Posted on 9/20/2009)
Very, very happy with the results - totally transformed the car.
It has sorted out ignition, sparking, runs great, really smooth, also tick over has improved.
Lovely piece of kit, easy to install.
Plugin and definitely play ;-)
Review by Mark Everall /
(Posted on 6/20/2009)
Wonderful constuction and a beautiful fit, looks killer.