034Motorsport High Flow Intake Manifold, Transverse 1.8T, Small Port
We Also Recommend
034Motorsport's Transverse 1.8T High Flow Intake Manifold has finally arrived!
This manifold was designed to be a direct bolt-in replacement for the stock intake manifold, and features a modular design, with a rotatable plenum that allows for driver side or passenger side throttle body locations.
Featuring a 1.85L plenum, the 034Motorsport High Flow Intake Manifold was engineered not only for high-horsepower, big turbo builds, but also to offer noticeable improvements in low-end and midrange power, even on stock turbo configurations.
Manufactured from A356 Using Low-Pressure Die Casting for Superior Quality and Surface Finish
High Flow and High Velocity Tapered Runners
Large Low-Profile Airhorns and Smooth Plenum Interior for Improved Airflow Characteristics
Angled Runners and Indexed Throttle Body Position for Optimal Fitment and Intake Routing
"Stealth" Mounting Bosses for Nitrous or Methanol Injection
Provisions for Stock or 80mm Throttle Bodies
Complete with Vacuum Provisions - No Extra Vacuum Manifold Needed!
Available In Large Port and Small Port Configurations
Developed in partnership with GRAMS Performance
034Motorsport Transverse 1.8T High Flow Intake Manifold
Vacuum Port Fittings
Vacuum Port Plugs
Copper Sealing Washers
1996 - 2003 Audi A3/S3 (8L)
1.8T (180HP & 225HP)
1998 - 2006 Audi TT (8N)
1.8T (180HP & 225HP)
1999 - 2005 Volkswagen Golf / GLI / GTI / Jetta / New Beetle (MkIV)
Runner 1 - 290.424839 CFM
Runner 2 - 289.215817 CFM
Runner 3 - 288.897168 CFM
Runner 4 - 289.169699 CFM
Though this intake manifold is a direct fit to the 1.8T engine, some small modifications to covers and hose routing may be required, also throttle body position is slightly different than stock and may require a modification to the throttle body inlet hose to fit the stock or our 70mm upgrade.
The small port is the exact same manifold as the large port, and can be bored out for large port applications if desired.
The plenum-to-runner bolts should be torqued to 7nm or 62in lbs.