Welcome to 034Motorsport
We ship worldwide!
877-591-9571

Wavetrac Limited Slip Differential, B5/B6/B7 Audi A4/S4/RS4 Rear, Early Audi Front

More Views

Wavetrac Limited Slip Differential, B5/B6/B7 Audi A4/S4/RS4 Rear, Early Audi Front

Be the first to review this product

Part Number: 40.309.170WK
Manufacturer:

Key Features / Product Warranty

We're proud to offer the Wavetrac Differential for Audi/Porsche models! This limited slip differential replaces the rear differential on B5 Audi A4/S4/RS4 models, as well as Porsche 944s produced after 1986. It can also be used to replace the front differential in early audi models.

Features:

  • Designed & Manufactured in the USA
  • Built With High Strength 9310 Alloy Steel
  • Exclusively Made, High Strength Fasteners By ARP®
  • Enhanced No-Load Bias Ratio
  • Interchangeable Friction Plates
  • Limited Lifetime Warranty

Fitment:

  • Porsche 944 1986+ (Including Turbo)
  • B5/B6/B7 Audi A4/S4/RS4 Quattro (Rear Differential)
  • Audi Coupe GT, 4000 Quattro, Quattro Coupe with 016/093 Manual Transmission (Front Differential)

Please Note: Porsche 944 turbo and turbo S models with OEM LSD and trans oil cooler option must convert to open-diff style drive gear, part number 016.155.165A and rollpin N.100.792.01.

Enhanced No-Load Bias Ratio via Wave Design Center Pack

One of the known shortcomings of a typical torque biasing differential is its loss of drive (behaving much like an open diff) under zero or near-zero torque conditions (for example, when there is 'no-load' applied through the drivetrain, either at vehicle stationary and/or transition from engine driving vehicle to engine braking and back).
The Wavetrac® differential uses a patent pending design to improve grip in low traction conditions. Precisely engineered, converging / diverging wave profiles are placed on one side gear and its mating preload hub. As the two side gears rotate relative to each other, each wave surface climbs the other, causing them to move apart. This imparts an increased normal force through the side gears, increasing the bias ratio as a function of load. This increase occurs automatically only when conditions find it necessary, and it 'reverts' back to its nominal bias ratio quickly and seamlessly, maintaining optimal drivability and performance at all times. It's like having two differentials in one: you get the benefit of a higher bias ratio when needed without detriment to the car's handling.

Interchangeable Friction Plates Provide Controlled Bias

The Wavetrac® differentials behavior can be altered in the field to suit your needs. It comes standard with carbon-fiber bias plates for the best all around performance. Interchangeable plates using materials with different friction coefficients to fine-tune the bias ratio are sold separately.
These friction plates provide a mechanism to tune the response of the differential as a function of applied torque load. The applied torque load manifests itself as an axial load from the differential pinions into the housing. This axial force is then considered a normal force into the friction plate, and as a function of the effective coefficient of friction, will provide a resistive torque to the rotational motion of the differential pinions. The resistive torque will add to the resistance of relative rotation of all components within the differential. The resistive force, however, is non-uniform since it is a function of the axial load from the differential pinions. The unbalance of the resistive torque will manifest as non-uniform energy absorption within the differential causing a bias ratio.

Superior Design, Materials, and Construction

Designed from a clean sheet, the new Wavetrac® Differential brings current gear technology to the market. Internally, its gear tooth forms are optimized for strength and improved oil film retention over competitive designs. Our gear package is smaller, reducing overall mass, yet is more durable. Attention was also paid to the side gear/axle interface, putting as much material thickness as possible in this critical area - most important when power levels get high.
Each Wavetrac® Differential is crafted from the highest quality materials available. The internal gears are made from high strength 9310 alloy steel. The diff bodies are machined from case hardened steel billet. To complete the package, every Wavetrac® differential is built using high quality, high strength fasteners exclusively from ARP®, the world leader in fastener technology.

===
----