Key Features / Product Warranty
Custom Forged JE Piston Sets for the 4.2L 32V V8 are now available at 034Motorsport! These pistons are manufactured using JE's 2618 alloy, which is much stronger than the 4032 alloy used in other aftermarket pistons. These custom piston sets are built-to-order, and are available with a myriad of options that you can select below.
All of these piston sets are sold with a proprietary JE coating for use in Alusil engine blocks.
- JE Forged 4.2L 32V V8 Pistons (Set of 8)
- JE Piston Rings (Set of 8)
- JE 21mm Wrist Pins (Set of 8)
- Wire Locks (Set of 16)
Bore - These pistons are available in 84mm, 84.5mm, and 85mm bores. We typically recommend an 84.5mm bore for increased displacement with plently of cylinder wall thickness left. Using a larger than stock (84mm bore) piston will require additional machinework to the block.
Compression Ratio - These pistons are available from 8.0:1 to 10.0:1 compression ratios. Lower compression allows for increased boost and timing, but will feel sluggish out of boost. We typically recommend 9.0:1 comprssion ratio for street-driven turbocharged vehicles, and anything higher than 9.5:1 for naturally aspirated engines only.
- Mild Steel - The mild steel wrist pins are recommended for engines making up to 800HP.
- Tool Steel - JE Thick-Wall Tool Steel wrist pins are recommended for engines making over 800HP.
Thermal Barrier Crown - The thermal barrier crown coating is applied to the top of the piston and is designed to reflect heat into the combustion chamber, thereby increasing exhaust gas velocity and greatly improving scavenging potential. The .0015" thick coating can also assist in extending piston life by decreasing the rate of thermal transfer.
JE Pistons for the 4.2L 32V V8 feature 21mm wrist pins, which can be used with our 154x21 Forged Connecting Rods.
There is typically a 2-3 week lead time for custom piston sets. The addition of coatings adds 1-2 weeks to the lead time.
No returns or exchanges will be accepted on custom piston sets!