- Home /
- Mount, Density Line, Subframe Rear B4 and B5
We are VERY excited to be announcing the release of our 034Motorsport Track Density Subframe mouts for B5 Audis!
WHAT THEY ARE: A new line of solid filled rubber motor mounts made FOR us by OE suppliers to OUR specifications.
TRACKDENSITY Mounts are solid rubber mounts, but with an 85durometer approx 50% stiffer than stock, these are solid for all practical purposes and result in ZERO drivetrain movement. Vibrations from the engine are noticeably increased but not horrible. Definitely not smooth and quiet like stock mounts, but in return you get a completely locked down drivetrain with NO slop or deflection. These are perfect for the street/track enthusiast who doesn't mind a marked increase in vibration from the drivetrain.
NOTE, THIS IS NOT AN OE MOUNT AND ARE NOT AVAILABLE FROM ANY OTHER SOURCE - These are built by an OE supplier to 034Motorsport specifications.
Mounts will fit all rear B4 and B5 chassis car subframes. B4 and B5 chassis cars include B4 80/90, RS2, B5 A4 and S4. These mounts are recommended for vehicles with increased handling limits, Track Density Subframe mounts will ensure suspension geometry does not change at high suspension loads like OEM do.
Price per set of 4 mounts, enough for the rear subframe.
INSTALLATION NOTE: Before installing these rubber bushings, put them in a freezer for at least 30 minutes. Also, some superficial tearing of the rubber ring around the top of the mount is normal when installing these pushings, it won't do it on all depending on how straight they go in, but all the function of the rubber mount is around the center underneath the sleeve, do not be concerned with a little cracking around the top rubber ring of the mount.