Have a Question? - Contact Us
Welcome to 034Motorsport!

Audi AAN S4 SPEC Clutch Kit

More Views

Audi AAN S4 SPEC Clutch Kit

Availability: In stock


* Required Fields



This clutch kit is for the Audi S4/S6 with AAN 20vt motor with the stock flywheel.

Can also be used in any of these cars with an 01E transmission with the 01A style flywheel. Clutch level descriptions:

Stage 1: Stock-like daily drivability and very good wear characteristics. High clamp pressure plate, steel-backed and multi-compound woven organic material and high torque sprung hub and disc assembly. The perfect choice for a slight upgrade from stock type power levels, for example, just a chip modification.

Stage 2: Stock-like daily drivability and EXCELLENT wear characteristics. (Also good for stock power levels and spirited driving when good daily drivability and extremely long life are the goal.) High clamp pressure plate, full faced Kevlar friction material and high torque sprung hub and disc assembly. Good to about 400HP and mild abuse.

Stage 3: Offers nice daily drivability with a comfortable, stock-like pedal feel and quick engagement. Good wear characteristics under low and high stress usage. High clamp pressure plate, 6 puck ceramic friction disc with high torque sprung hub and disc assembly, bearing and tool kit. This is a nice all around kit for the average highly modified project, good holding power to the 450HP range, great long life use.

Stage 3+: This is the ultimate High HP Street kit, offers good, stock-like daily drivability and better manageability than the stage 3, with even better wear characteristics. High clamp pressure plate, full-faced carbon metallic friction material, high torque sprung hub and disc assembly. We recommend this for street or track driven applications up to 550 crank HP, you simply will not wear this clutch out.

Stage 4: Somewhat less street-friendly due to more direct engagement. High clamp pressure plate, 6 puck ceramic disc with high torque rigid hub and carrier assembly. Note, unsprung hub means faster, more direct engagement and high HP rating, we recommend this kit for the 500HP range.

Stage 5: Very aggressive, immediate engagement, sintered iron friction surface, solid hub, 6 puck design. For the truly horsepower endowed, perfect for drag racing and 600+HP applications where abusive driving is the norm.  This clutch can only be used with an aftermarket flywheel, and will not fit the factory dual mass flywheel.

Stage 5+: Same disc as the stage 5, but with a customized dual spring diaphram pressure plate, a real left leg thigh builder. The absolute strongest holding clutch we offer, we've tested this to well over 700whp, and 30psi 2nd gear drag launches with not a single slip or clutch problem ever, and almost no wear in over 30 hours of hard abuse.


Please Note: This clutch is a non-stock item and availability is dependent on the manufacturer's current inventory.  Allow up to 48 hours for processing when ordering, and please contact our Sales Staff for current availability if a rush order is needed.

Additional Information

Additional Information

Manufacturer No